White walls are a staple in many homes, creating a bright and airy feel. But cleaning them is no easy feat. From grime buildup to nicotine stains and more, white walls can quickly become an eyesore if not cared for properly. This blog post will look at how to clean white walls using simple household ingredients.
Supplies Needed
To clean your white walls, you will need the following supplies:
- A bucket;
- Warm water;
- Mild dish soap;
- A sponge or rag;
- A soft cloth;
- White vinegar (optional).
Start by filling your bucket with warm water. Add a squirt or two of mild dish soap and stir it around to create suds. Dip your sponge or rag into the soapy water and wring it out until it’s only damp. Gently scrub your walls in a circular motion, working from the bottom up. As you clean, you may notice that some stains are more challenging to remove than others.
You can add a bit of white vinegar to your sponge or rag before scrubbing. Once you’ve gone over the entire wall, rinse your sponge or rag in the bucket of clean water and give the wall a final once-over to remove any soap residue. Finally, dry the wall with a soft cloth.
Steps to Cleaning White Walls
Assuming your white walls are painted with latex paint:
1. Begin by dusting the wall with a clean, dry microfiber cloth. You may also use a vacuum with a soft brush attachment to remove dust from the surface.
2. Once the surface is dust-free, you can start washing the walls with a mild soap and water solution. Use a sponge or soft cloth to avoid damaging the paint.
3. Rinse the sponge or cloth frequently to avoid re-depositing dirt on the wall.
4. After washing, rinse the area with clean water to remove any soap residue.
5. Allow the area to air dry completely before continuing.
Other Tips for Cleaning White Walls
– Start by dusting your walls with a microfiber cloth.
– If you have any smudges or fingerprints on your walls, you can use a little soap and water on a cloth to clean them off.
– For tougher stains, you can make a paste out of baking soda and water and scrub the stain with that.
– To get your walls sparkling clean, mix together equal parts vinegar and water in a spray bottle and lightly mist your walls with it. Wipe down with a damp cloth afterward.
When to Call a Professional
If your white walls look dingy or have started to yellow, it’s time to call in a professional. A good cleaning will brighten up your walls and make them look new.
If you have deep stains on your white walls, a professional can help you eliminate them. They will also be able to protect your walls from future stains.
A professional can also help you if you’re unsure how to clean your white walls properly. They will know the best products to use and the best methods for getting your walls clean.
Conclusion
Cleaning white walls can seem daunting, but it doesn’t have to be. With the right supplies and some elbow grease, you can get your white walls to look like new again in no time. Before applying them all over the wall, test any cleaning solutions on an inconspicuous area. Always use gentle strokes when scrubbing or wiping off the dirt to avoid damaging the paintwork.
Comments are closed.